There are things you
need to do on a regular basis in order to test whether or not the electrical
fence is working and to make sure there are no impediments to its working.
Compare
Quotes on Electrical Fencing Now
On a regular basis, you should inspect the box that is sending out the signal.
It should be free of cracks or water damage. Any cracks should be fixed because
water can get into the system and can short it out if you are not careful. Next,
you should get a voltmeter/ammeter and check to see the current going through
the wire. Any break in the wire can disrupt the signal. Do this all along the
line of the electrical fence and while you’re doing that, go ahead and briefly
inspect the wiring along the way.
Turn off the electrical box and make sure the electrical signal is off. Go along
the wires and make sure none are rusting or bent. If a part of the wire is bent
or rusted, it could disrupt the signal by breaking sometime in the future.
Replace those sections of wire or if much of the wire is in disrepair, replace
the whole thing.
While the electricity is off, take a look at the foliage in the area. You could
have problems if plants or trees have grown too close to the fence. Even grass
that has grown too high could be a problem. Mow carefully along the fence to
keep weeds and foliage down from the fence. Be careful not to damage the fence
in the mowing process. Make sure the ground post is securely in the ground and
cannot come out easily. If grounding is incomplete, put in more ground rods at
least 6 to 8 feet long, using galvanized steel. Use good grounding clamps when
putting in the grounding rods.
Get
Prices for Electrical Fencing Now
Make sure that you use the same type of metal all around your wiring. If you try
to connect copper wire to steel wire, a type of electrolysis occurs and the
metal soon becomes corroded. Use the same type of metal for the wiring
throughout the fence. If you are having problems, make certain that your fence
posts are the right distance apart. If the posts are fifty feet apart or less,
it is too close. If the posts are more than 100 feet apart, this is too far
apart. The wire will simply bend down and it won’t keep the animal in the
fenced-in area or can just be stepped on by a person who might be trying to gain
entry.
Good fence maintenance keeps your fence going for years and years. Do
maintenance every month to make sure the system is up and running.
DISCLAIMER: The information contained in this article is the opinion of the Author and should not be taken as advice.